Triangular Baseboard Return Grille - White Metal Vent
Our baseboard return grille is constructed entirely out of steel and has an open faceplate. Sturdy and functional, this baseboard return grille's fins are spaced at a 20 degree angle and at 1/3" apart from one another, allowing proper airflow into your HVAC system. The bottom of the metal vent extends out from the wall in a triangular fashion and at about 3 3/4". See technical drawing below for specifics.
Installing the baseboard return grille is easy, just screw mount into place with the screws provided. The metal vent is ordered and measured according to your ductwork opening and ensures that the hole is properly covered. Replace your worn out baseboard return grilles today with these bright white metal vents which are protected with an enamel finish. These metal vents will ship straight to your home or work site for an affordable price!
Baseboard Return Grille Highlights
- Metal vent constructed from steel
- Bottom of grill extends 3 3/4"
- Fins set at 20 degree downward slant
- Bright White enamel coated finish
- Screws are included
- 8 available sizes
Triangular Baseboard Return Sizes:
Item # |
Hole Size |
Faceplate Size |
24-0001 |
10 x 6 |
11 3/8 x 6 7/8 |
24-0002 |
12 x 6 |
13 3/8 x 6 7/8 |
24-0003 |
14 x 6 |
15 3/8 x 6 7/8 |
24-0005 |
24 x 6 |
25 3/8 x 6 7/8 |
24-0007 |
30 x 6 |
31 3/8 x 6 7/8 |
24-0004 |
14 x 8 |
15 3/8 x 8 7/8 |
24-0006 |
24 x 8 |
25 3/4 x 8 13/16 |
24-0008 |
30 x 8 |
31 3/8 x 8 7/8 |
**TIP: All vents are measured based on the size of the duct hole. (I.E. if your duct hole is 10" x 6" you would select a 10" x 6" vent.)

For other open metal vents, check out our selection of triangular baseboard grilles or our triangular baseboard registers for adjusting your airflow.
Practical baseboard grilles are a must have to hide unsightly ductwork in your home or office. Order today!
|