Baseboard Return Air Grille - White Vent Cover
This baseboard return air grille projects away from the wall by 2" in a triangular fashion and is hard to find. Our white vent cover has a powder coated finish which helps prevents against corrosion. Easily installed, your baseboard return air grille simply is screw mounted into the wall by using the two screws included with your order. Classically white vent covers are your affordable option to remodeling projects or for replacing worn out vents in your home. Our baseboard return air grille is just an open faceplate which will return air back into your system.
The white vent cover is shown below in a detailed drawing which displays all of the measurements of the fins and of the faceplate. The baseboard return air grille fins are spaced at about a 20 degree angle set at 1/3 inches apart. Order this white vent cover for one low cost and find your size by measuring the actual wall hole opening.
Baseboard Return Air Grille Highlights
- Durable, powder-coated white finish
- Air fins spaced 1/3" and at 20 degrees from each other
- Solid steel construction
- Bottom projection from wall is 2"
2 Inch Projection Baseboard Grills Available Sizes:
Item Number |
Hole Size |
Faceplate Size |
10-0115 |
14 x 6 |
15 1/4 x 7 1/2 |
10-0116 |
24 x 6 |
25 1/4 x 7 1/2 |
10-0117 |
30 x 6 |
31 1/4 x 7 1/2 |
10-0118 |
14 x 8 |
15 1/4 x 9 1/2 |
10-0119 |
24 x 8 |
25 1/4 x 9 1/2 |
10-0120 |
30 x 8 |
31 1/4 x 9 1/2 |
Tip: To find your white vent covers correct size, measure the hole opening in your wall. Do not measure any existing baseboard return air grilles since faceplate sizes vary from manufacturer to manufacturer.

Locate more white vent covers in larger depth projection or in different lengths in our triangular baseboard returns section.
Purchase your baseboard return air grille today and get the airflow moving in your home!
|