Metal Return Grille - Pewter Air Vents
These flat metal air vents have a turnback of 3/16 an inch, making this a practically flat grille. Vent covers are installed over your ceiling or wall duct work and remain open to let air flow through your space. Pewter finished metal grilles add a simple decorative touch that will change up your look at an affordable price. Functional return air vents are a must but that doesn’t mean you have to settle for traditional white.
Install the metal grilles in a snap without any professional help. Provided with the return air vents are a set of screws which are to be set into the pre drilled screw holes and then mounted. The metal grilles are constructed out of all steel to match other metal grilles and registers in your home. Our return air vents are to be purchased according to the hole opening in your wall and will have a faceplate which measures slightly larger.
Flat Metal Air Grille Highlights
- Return air vents have a 3/16 inch depth
- Suitable for use in the wall or ceiling
- Decorative pewter finish
- 20 degree angle spacing of fins
- Screws included
Pewter Rectangular Return Grille Sizes:
| Item # |
Hole Size |
Faceplate
Dimensions |
| 10-0170 |
12" x 6" |
13 1/4" x 7 1/4" |
| 10-0171 |
14" x 6" |
15 1/4" x 7 1/4" |
| 10-0174 |
30" x 6" |
31 1/4" x 7 1/4" |
| 10-0176 |
14" x 8" |
15 1/4" x 9 1/4" |
| 10-0178 |
30" x 8" |
31 1/4" x 9 1/4" |
Tip: The return air vents faceplate will measure approximately 1 1/4" larger than the listed size below. When ordering, do not take measurements of your old grilles. These metal grilles are listed by your duct opening. The 24 x 8 will cover a hole which measures 24 x 8 inches.
Check out more return air vents on our website for other finishes offered. We also have this item in a baseboard return for those looking for a return with a 7/8".
Our pewter metal grilles are brightly plated and will add a sparkle to any space whether it be your home or office so try today!
|
