Brass Floor Vent - Victorian Style Metal Register Covers
Brass floor vents make a beautiful accent in any room. Metal register covers with a brass plated finish and lacquer coating will last for years. Our brass floor vents have a steel core allowing them to be as durable as they are eye-catching. These metal register covers have a steel damper which allows you to be in control of the amount of air entering a room. To install the brass floor vent you just need to drop it into the duct hole, no tools needed. Looking for matching metal register covers for the wall? With the use of all clip these brass floor vents can be turned into wall vents. Please check below for more information about the wall clips.
Victorian Floor Register Highlights
- Metal register covers with drop-in installation
- Lacquer coating to protect finish and prevent rusting
- Steel construction
- Adjustable damper to control air flow
*Please note: This product's design changes based on the size you are ordering. For example, a 4 x 10 size is going to look slightly different in design than the 4 x 14 size. Please see below at Detailed Images to see how these designs differ with size.
Polished Brass Plated Victorian Available Sizes:
Item # |
Hole Size |
Faceplate Size |
37-0088 |
2.25 x 10 |
3 7/16 x 11 3/16 |
37-0036 |
2.25 x 12 |
3 7/16 x 13 3/16 |
37-0123 |
2.25 x 14 |
3 7/16 x 15 3/16 |
37-0037 |
4 x 10 |
5 5/16 x 11 1/4 |
37-0038 |
4 x 12 |
5 5/16 x 13 1/4 |
37-0039 |
4 x 14 |
5 5/16 x 15 1/4 |
37-0040 |
6 x 10 |
7 3/8 x 11 3/4 |
37-0041 |
6 x 12 |
7 3/8 x 13 3/4 |
37-0042 |
6 x 14 |
7 3/8 x 15 3/4 |
Tip: Brass floor vents are sold by the hole size they fit into. For example, a 4" x 12" holes would require a 4 x 12 metal register covers.
Wall clips should only be used with the 2.25" and 4" wide sizes. These sizes cannot be used on the ceiling.
The 6" wide sizes come with knock-out screw holes and matching screws. This allows the metal register covers to be used on the wall as well as the ceiling. Check out this helpful video explaining how the knock-out screws are used.
Need more new metal register covers? We have a large selection to choose from.
Order new brass floor vents, it is a quick and easy way to improve the look of any room and these will last for years to come.
|