Brass Floor Vent - Rockwell Floor Register
Strikingly unique, these floor air vents are featured in the Rockwell design which takes a classic look and puts a modern spin on it. Our plated polished brass register covers are made with 3mm steel and are protected by a lacquer to help prevent tarnish and corrosion. The floor air vent installation process is a snap, just drop the brass register covers into your floor opening.
Our brass register covers also can be used for wall registers for those looking to re-do entire rooms. The floor air vent simply needs to be attached with special mounting clips. Adjusting brass register covers with metal damper, will allow you control to open up or close off the floor air vent for desired airflow.
Metal Floor Vent Highlights
- Brass register covers constructed with 3mm steel
- Drop into floor opening for installation
- Plated polished finish
- Metal damper to open up or close off airflow
Decorative Rockwell Register Available Sizes:
| Item # |
Size |
Faceplate Sizes |
| 37-0227 |
2 x 12 |
3 1/2 x 13 1/8 |
| 37-0211 |
***4 x 10 |
5 3/4 x 11 1/2 |
| 37-0212 |
4 x 12 |
5 3/4 x 13 7/8 |
| 37-0213 |
4 x 14 |
5 7/8 x 15 3/4 |
| 37-0214 |
6 x 10 |
7 5/8 x 11 5/8 |
| 37-0215 |
6 x 12 |
7 5/8 x 13 5/8 |
| 37-0216 |
6 x 14 |
7 5/8 x 15 5/8 |
| 37-0228 |
8 x 10 |
9 1/8 x 11 3/4 |
***Out of stock with No ETA
Tip: To order the correct brass register covers, do not measure existing registers. Instead, a 4 x 10 hole opening will need a 4 x 10" floor air vent.
All of our floor air vent can be wall mounted with these wall mounting brackets. These decorative brass register covers cannot be used on the ceiling.
Many other decorative floor vent designs & finishes are also sold on this website.
Polished up your style with brass register covers that are sure to brighten up your day. Order these now! |
