Home >> Floor Registers >> Metal Floor Registers >> Heavy Gauge Steel Floor Register

Heavy Gauge Steel Floor Register

Heavy Gauge Steel Floor Register
(0 reviews)  

Heavy Duty Floor Register - Metal Vents in 19 Sizes

When looking for heavy duty floor registers that will support foot traffic and a substantial amount of weight, these are exactly what you need! Our metal vents are constructed out of all steel and are made for their durability and strength. The faceplate on the heavy duty floor register features a cross grid design with open slots that are spaced about 1/2” apart from one another. Underneath the metal vent is the damper which is controlled by the adjustable toe valve on top of the vent plate. This heavy duty floor register is perfect for your home or businesses heating and cooling needs!

Our metal vent is offered in 19 sizes, including some hard to find options. The heavy duty floor register has a light brown finish and simply drops into your floor when installing. Some of the metal vents are special order and may take additional time to ship. We will contact you should there be a delay.

Heavy Duty Floor Register Highlights

  • Metal vent constructed out of steel
  • Over 75% free area
  • Finished in a light brown enamel
  • Damper opens with adjustable toe-valve
  • Easy toe-operated control
  • Overall Dimenisons are + 1 13/16"
  • 2 7/8" Drop-In depth

Heavy Gauge Registers Available Sizes:

Item # Hole Size   Item # Hole Size
24-0078 4 x 8   24-0091 8 x 10
24-0083 4 x 10   24-0192 8 x 12
24-0183 4 x 12   24-0093 8 x 14
24-0084 4 x 14   24-0100 9 x 12
24-0085 6 x 8   24-0095 10 x 10
24-0186 6 x 10   24-0096 10 x 12
24-0187 6 x 12   24-0197 10 x 14
24-0188 6 x 14   24-0098 12 x 12
24-0089 6 x 16   24-0099 12 x 14
24-0090 8 x 8


The actual heavy duty floor register faceplate will measure about an 1 13/16” larger than the size listed above.

The thickness of the faceplate is 3/16 inch and drops into the hole opening approximately 2 7/8 inch with the damper open.

Tip: When ordering your heavy duty floor registers, make sure you are getting the measurement of the hole in the floor. A 4 x 10 metal vent will fit into a hole opening which measures 4 x 10.

These metal vents are also offered in heavy gauge return grilles for a larger variety of sizes and offered in another finish.

Looking for a different design and more finish options? This is also offered in 7 decorative designer finishes. These oversized custom floor return grilles are also available in standard colors (tan and white). If you need an oversized floor register (with a damper control) please see our custom metal floor registers.

Order one today and have it shipped straight to your door for one low cost!

SKU 24-0078#
Price: $70.19
Heavy Gauge Oversized Floor Registers - Steel
Large Floor Registers - Brown Steel Floor Vent
White Steel Louvered Floor Register
Brown Louvered Floor Register
Flat Black Rockwell Floor Register
Heavy Gauge Floor Grille - Brown
1 Inch Filter - Permanent
Sidewall / Ceiling Register
Shoemaker 1600R Series - Custom Metal Floor Return Grilles - Standard Colors
Imperial White Steel Baseboard Return
Shoemaker 850 White Metal Sidewall / Ceiling Register
There have been no reviews