Rockwell Antique Brass Register - Decorative Vent Cover
These finely crafted antique brass registers are made out of 3mm thick steel construction which adds to the decorative air vent covers durability. The rockwell design on our decorative air vent covers offers a modern touch to your space without going overboard. The antique brass registers are made with a plated finish and have a protective lacquer coating which helps to prevent tarnishing. Our decorative air vent covers allow you to control the airflow in the room with its adjustable steel damper.
This antique brass registers can also be used as a wall or ceiling register; more details below the table. For floor installation, the decorative air vent covers have a one step process of simply dropping the antique brass registers into the floor opening.
Antique Brass Floor Register Highlights
- Decorative air vent covers with 3mm thick steel construction
- Plated antique brass finish
- Adjustable steel damper
- One step installation
Rockwell Design Vent Cover Available Sizes:
| Item # |
Size |
Faceplate Dimensions |
| 37-0217 |
2.25 x 12 |
3 3/8 x 13 3/16 |
| 37-0160 |
***4 x 10 |
5 11/16 x 11 1/2 |
| 37-0161 |
4 x 12 |
5 3/8 x 13 3/8 |
| 37-0162 |
4 x 14 |
5 3/4 x 15 3/4 |
| 37-0163 |
6 x 10 |
7 3/8 x 11 1/2 |
| 37-0164 |
6 x 12 |
7 3/8 x 13 3/4 |
| 37-0165 |
6 x 14 |
7 3/8 x 15 3/4 |
| 37-0218 |
8 x 10 |
9 3/16 x 11 13/16 |
***Out of stock with No ETA
Tip: Remember that when ordering the antique brass registers, you must measure the floor hole opening. A 6 x 10" decorative air vent cover will fit a 6 x 10" floor opening.
These antique brass floor registers can also be wall mounted. The Rockwell decorative air vent cover can be mounted by using our metal wall mounting brackets. Only for use on walls.
Other decorative air vent covers are available for purchase if these antique brass registers don't match your decor.
Remake your space with these antique brass registers which will surely work in home or office. Try today!
|
