Triangular Baseboard Register - Metal Air Vent
Easily installed, our triangular baseboard registers have a bottom projection from the wall which measures 3 3/4" deep. This metal air vent has a white enamel finish for protection and durability. The triangular baseboard register is equipped with a single plate damper which you can use to open or close off the airflow in your room. Therefore, this metal air vent is perfect for both your heating and cooling needs!
Fins on the triangular baseboard register are spaced at about 1/3" and they sit at a 20 degree angle to allow for proper airflow throughout your room. Our metal air vents are made in the USA and have an all steel construction.
Triangular Baseboard Register Highlights
- Metal air vent is crafted from steel
- 3 3/4" Depth
- Plate style damper
- The fins are at a 20 degree angle at a 1/3" spacing
- Has a bright white enamel finish
- Use for heating and cooling purposes
White Baseboard Register Sizes:
| Item # |
Hole Size |
Base Projection |
Outside Dimensions |
| 24-0072 |
**8 x 6 |
3 3/4 |
9 3/4 x 6 5/8 |
| 24-0056 |
10 x 6 |
3 3/4 |
11 3/8 x 6 7/8 |
| 24-0057 |
12 x 6 |
3 3/4 |
13 3/8 x 6 7/8 |
| 24-0058 |
14 x 6 |
3 3/4 |
15 3/8 x 6 7/8 |
**The 8x6 is a speciality non-stock size. It can take approximately 4 weeks to bring into our warehouse for shipment.
Tip: To order the correct metal air vent, measure the duct opening found at the foundation of your wall and along the baseboard. A 12" x 6" triangular baseboard register will cover a 12" x 6" duct hole opening while the actual faceplate will measure slightly larger than this.
We have matching metal air vents in our baseboard return grill section which allows for constant airflow. We also have other triangular baseboard registers for those needing larger sizes.
These traditional metal air vents are classically designed for modern homes needing triangular baseboard registers so order now!
|
