Home >> Wall Registers >> Wood Wall Registers >> Pattern Cut Designer Wall Registers

Pattern Cut Designer Wall Registers

Pattern Cut Designer Wall Registers

Pattern Cut Wood Wall Registers - Custom Decorative Vent

Custom wood wall registers can be ordered according to the size and design you need to match your home. Our decorative vents are shown below in the 26 standard designs and in the 26 register sizes which are offered. The wood wall registers include a steel damper unit which is mounted into your wall opening. These decorative vents can be used in both heating and cooling needs since the damper will control how you distribute your air flow. The wood wall registers themselves are made out of 1/4" thick Baltic birch hardwood ply which are offered in cherry, oak or maple veneers. Each decorative vent is left unfinished and may either be stained or painted according to your desire. The maple veneer is recommended for painting.

Installing the wood wall registers is a breeze because you can order your grill with the screw holes already pre drilled into the sides. If you choose no screw holes, you may drill the holes yourself. The decorative vents come with screws and should only be mounted onto your wall or onto your ceiling, never the floor. Beautifully made, the wood wall registers are cut with a laser for precise, clean designs every time. Try these decorative vents in your home and rid yourself of boring metal registers.

Wood Wall Registers Highlights

  • Customize decorative vents by design and size
    View Available Designs HERE
  • Adjustable damper is made from steel
  • Cherry, maple and oak veneer options
  • Grille is made from Baltic birch hardwood ply
  • Faceplate is 1/4" thick
  • Unfinished grilles can be painted or stained
  • Design cut with a laser
  • Install to your wall with included screws
  • Screw hole placement will vary with grille size

Tip: Order the decorative vents according to your hole opening measurements and not by the measurements of an existing register. A 10 x 6 wood wall register damper size will fit into a 10 x 6 hole which measures that size. Add 1 3/4" to the size which is listed below to have the overall faceplate dimensions.
Important: Allow your decorative vents 7 to 15 business days to be made and then shipped to your home direct from the manufacturer (located in CA). These wood wall registers are considered Special Order, Non-Returnable and cannot be canceled once placed.

Damper does not come attached to the grill; Simply fit it into place inside your wall opening.

Pattern Cut Register - Installing the damper

Looking for decorative vents without a damper or in a larger size? We also have Pattern Cut grilles available in over 50 sizes!

Bring these wood wall registers into your home now and restore your rooms natural beauty.

SKU 10-0501+Damper
 
Price: $55.00
Design
Choose Hole Size
Choose Veneer
Screw Holes
Qty
Pattern Cut Designer Wall Registers
Pattern Cut Wood venner Choices
Decorative wood wall register
 
 
Brown Louvered Floor Register
 
Plastic Baseboard Return - White
 
Sidewall / Ceiling Register
$5.69
 
$4.11
 
$5.69
 
 
 
Accord White Round Register - 6 Inch
 
Accord White Round Register - 8 Inch
 
Pattern Cut Designer Wall Grilles
$15.34
 
$19.84
 
$30.00
 
 
 
Fancy Vents Glory Return Filter Grill - Medium Sizes
 
Fancy Vents Taylor Return Filter Grill
 
Hamilton Sinkler Strathmore Black Floor Register
$519.00
 
$519.00
 
$50.00